Rotork launches 3rd generation IQT intelligent part-turn valve actuator
The introduction of the new Rotork IQT electric valve actuator brings the advanced functionality and asset management capabilities of Rotork’s 3rd generation intelligent technology to the direct-drive operation of part-turn valves.
Proven in the field by thousands of IQ3 multi-turn actuators, new functionality brought to the compact and robust IQT includes an unrivalled range of advanced data logging and communication capabilities that have been increased in response to the end users’ desire to access more data, both in the field and in the control room.
Diagnostic graphics present a window into the process, showing the valve torque, usage profiles and service logs, facilitating real-time analysis directly at the actuator. The information-rich backlit display is the focus of attention for nonintrusive wireless communication and multi-functional indication, including user-friendly multi-lingual menus for configuration and commissioning. Local position indication, valve and actuator status, asset management and diagnostic operating information is available to download and can be viewed directly at the actuator on the large LCD display. The display provides real-time status data, positional and warning icon information; actuator setup and operating menus along with detailed diagnostic and operational data screens are clearly displayed in dot matrix format.
Using the Rotork Bluetooth® Setting Tool Pro, commissioning and configuring the actuator is faster and simpler than ever. The setting tool can also be used to securely transfer data from the actuators to a PC for analysis using Rotork Insight2 diagnostic software. Insight2 can further streamline actuator set up by pre-defining complete sets of instructions and settings. Each collection of settings can be saved as a ‘mission data set’ and quickly applied to multiple actuators requiring the same configuration.
Valve maintenance requirements can be identified and anticipated, eliminating unplanned interruptions to the process or over-cautious planned maintenance outages. The actuator's powerful datalogger provides comprehensive data capture for planned maintenance and troubleshooting. Data includes valve torque profiles, operational start profiles, vibration and temperature trend logs and an event log. Specific asset management information includes running time, average torque and number of starts. Service or maintenance alarms are selectable from configurable menus including open and close torque levels, total starts and vibration levels.
Torque sensing is reliable and accurate over the life of the actuator. Similarly, reliable valve positioning is critical. A patented absolute encoder with only one moving part tracks valve position without the requirement for a battery even when there is loss of power. In addition, as all configuration and datalogger data is stored in a non-volatile EEPROM memory, all settings are retained. If an actuator is manually operated during a power outage, the local display and remote indication is kept updated by the use of a battery which The introduction of the new Rotork IQT electric valve actuator brings the advanced functionality and asset management capabilities of Rotork’s 3rd generation intelligent technology to the direct-drive operation of part-turn valves. also facilitates data logging and power-off commissioning.
IQT actuators are suitable for three phase, single phase or DC power supplies, with a torque output range of 50 to 2000Nm available for isolating, regulating and modulating duties. The motor always runs in the correct direction, irrespective of supply type and connection. In addition, the output speed can be non-intrusively adjusted over a 4:1 range without affecting the output torque. All valve interface bases conform to ISO5211 or MSS SP 101 and are fitted with removable couplings.
Hazardous area actuators are fully approved to the latest ATEX standards. Network connectivity options include Foundation Fieldbus®, Profibus®, HART® and DeviceNet® open systems, as well as Rotork's own dedicated Pakscan wired or wireless systems.
Tel: +44 (0)1225 733 200
Published in Valve User Magazine Issue 34
- Flooding proves the watertight case for Rotork Actuators
- An Introduction to Networks Control systems for valve actuators
- Rotork Intelligent valve actuation for solar power plants
- Rotork aids Regeneration: Rotork actuators at the centre of successful UK environmental regeneration
- Rotork introduces compact electric actuator solution for marine valve applications
- South East Water awards valve actuation framework agreement to Rotork
- New Flowserve Software Simplifies Actuator Configuration, Diagnostics: Flowserve Dashboard Allows Bluetooth® Connectivity with Limitorque MX and QX
- Pakscan digital valve control goes wireless
- Rotork’s new CVA, mounted to a Metso valve
- Australia’s ‘Droughtbuster’ scheme chooses Rotork